CNC Products
X4 Plus X4 Plus.
- SyiL X4 plus CNC introduce.
- Syil X4 Plus - Cut Demonstration
- X4 Plus - Cut Demonstration
CLICK HERE FOR FULL X4 Plus. SPEC
Our X4 series represents a transformation from previous conversions to a complete ground up production of a true CNC masterpiece. This little mill, with its square column and cast base gives this benchtop mill cutting power that is hard to believe. Suitable for all materials including: titanium and hardened stainless steels.
These later revision machines have undergone complete vetting of its electronics, drivers, and lubrication systems that insures extended life and a reliable service record. One shot lubrication, double nut ball screws, customizable drivers, and industrial grade components make this a number one pick for a variety of tasks and skill level. All units are built in house to insure uniformity and accuracy.
All machines are easily upgradable, in the field and by the user, to CNC flood coolant. Other possibilities are digitizer, tool offset, or automated work lights. Affordability and production are the associated nick names of the X4.
-
x4plus_en(1).jpg -
x4plus_3.jpg -
x4plus_2.jpg -
x4plus.jpg -
x4plus_4.jpg -
x4plus_5.jpg -
x4plus_1.jpg -
x4_1.jpg -
x4_6.jpg -
x4_2.jpg
X4 Speedmaster X4 Speedmaster.
- Syil X4 4th Axis Gear Cutting
- SyiL X4 plus CNC introduce.
- Syil X4 Plus - Cut Demonstration
CLICK HERE FOR FULL X4 Speedmaster. SPEC
Speedmaster - over 4x the speed of the standard
Our X4 series represents a transformation from previous conversions to a complete ground up production of a true CNC masterpiece. This little mill, with its square column and cast base gives this benchtop mill cutting power that is hard to believe. Suitable for all materials including: titanium and hardened stainless steels.
These later revision machines have undergone complete vetting of its electronics, drivers, and lubrication systems that insures extended life and a reliable service record. One shot lubrication, double nut ball screws, customizable drivers, and industrial grade components make this a number one pick for a variety of tasks and skill level. All units are built in house to insure uniformity and accuracy.
All machines are easily upgradable, in the field and by the user, to CNC flood coolant, or even a CNC 4th. Other possibilities are digitizer, tool offset, or automated work lights. Affordability and production are the associated nick names of the X4.
-
xspeeden.jpg -
x4speed_5.jpg -
x4speed_1.jpg -
x4speed_4.jpg -
x4speed_3.jpg -
x4speed_6.jpg
X5 Speedmaster X5 Speedmaster.
- SYIL X5 CNC
- Syil X5Plus using 4th axis
CLICK HERE FOR FULL X5 Speedmaster. SPEC
We know some demand high-speed milling. Answering the call is our new X5 Speed Master. This machine utilizes a high-frequency, water-cooled spindle with 24000RPM standard. Users can also choose to change to an even higher 38,000 rpm spindle. Our next generation of improved engraving and milling machine, The X5 Speed Master is a sculpture, engraving and milling processing multifunctional machine while retaining low cost and ease of use we are known for.
This entirely new generation of machine is deeply inspired by other modern turning centers. X5 units replace the casting and ways with a solid new foundation and bolt on linear ways while maintaining the cutting power of the X4. This model gives every professional that extra travel speed and accuracy that others covet. Accuracy and repeatability surpassing the magic .0004 level and a new base design that improves stability fill the bill.
-
x5speeden.jpg -
x5speed_1.jpg -
x5speed_5.jpg -
x5speed_2.jpg -
x5speed_3.jpg -
x5speed_4.jpg
Spec X4 P X4 Plus. SPEC
Dimensions (L x W x H) - 760mm x 700mm x 850mm
Package dimensions - 900mm x 820mm x 1050mm
Table size - 550mm x 160mm
T-slot size - 12mm
Weight - 250 ~ 350kg
Working travel - X-axis: 280mm
Y-axis: 160mm
Z-axis: 270mm
Spindle Speed - 200 ~ 5000rpm/min
Spindle Power - 1.1kw
Spindle taper - NT30/R8
Input voltage - 220v single phase AC
Positioning accuracy - <0.015mm
Clamping tool diameter - 4 ~ 16mm
Feed rate - X / Y axis: 3000mm/Min Z-axis: 2000mm/Min
Motor torque - X-axis stepper motor: 6.0Nm
Y-axis stepper motor: 6.0Nm
Z-axis stepper motor: 7.0Nm
BallScrew - PMI double nut ball screw
Output port - standard 25-pin parallel port printing
standard 15pin parallel port
3.1 Inch single blue LCD display screen, display axis direction and movement size Panel centralized manual control system, cooling and spindle control The table size -550 x 160mm Precision high-speed 5,000 rpm spindle, NSK spindle bearings 7.0Nm AC variable frequency motor drive with Delta VFD High torque stepper motor 3 axis 220V single-phase AC power supply MT3 spindle metric or imperial size R8 Pre-installed high-speed cooling fan 1 x 120mm Selection of high-quality casting materials, compact Integrated casting base (optional), to further increase the stability of machine tools Imported from Taiwan OEM PMI double nut ball screw Intime Safety electrical components of high quality and fast plug Automatic lubrication system pre-installed to protect the rail life Pre-installed fourth axis fast interface Pre-loaded hand wheel controller MPG Pre-installed computer stand CE and CCC safety certification Spec X4 S X4 Speedmaster. SPEC
Dimensions (L x W x H) - 760mm x 700mm x 850mm
Package dimensions - 900mm x 820mm x 1050mm
Table size - 550mm x 160mm
T-slot size - 12mm
Weight - 250 ~ 350kg
Working travel - X-axis: 280mm
Y-axis: 160mm
Z-axis: 270mm
Spindle Speed - 8000 ~ 24000rpm/min
Spindle Power - 0.75kw
Spindle taper - NT30/R8
Input voltage - 220v single phase AC
Positioning accuracy - <0.015mm
Clamping tool diameter - 2 ~ 6mm
Feed rate - X / Y axis: 3000mm/Min Z-axis: 2000mm/Min
Motor torque - X-axis stepper motor: 6.0Nm
Y-axis stepper motor: 6.0Nm
Z-axis stepper motor: 7.0Nm
BallScrew - PMI double nut ball screw
Output port - standard 25-pin parallel port printing
The table size -550 x 160mm 24,000 Precision high-speed water-cooled spindle transfer With 220V single-phase AC inverter High torque stepper motor 3 axis 220V single-phase AC power supply Pre-installed high-speed cooling fan 1 x 120mm Selection of high-quality casting materials, compact Integrated casting base (optional), to further increase the stability of machine tools Imported from Taiwan OEM PMI double nut ball screw Intime Safety electrical components of high quality and fast plug Automatic lubrication system pre-installed to protect the rail life Pre-installed fourth axis fast interface Dual cooling system pre-installed standard base Pre-installed computer stand CE and CCC safety certification Spec X5 P 
X5 Plus. SPEC
Ultra high precision linear rails 3.1 Inch single blue LCD display screen, display axis direction and movement size Panel centralized manual control system, cooling and spindle control The table size -522 x 160mm Precision high-speed 5,000 rpm spindle, NSK spindle bearings 7.0Nm AC variable frequency motor drive with Delta VFD High torque stepper motor axis 220V single-phase AC power supply MT3 spindle metric or imperial size R8 Pre-installed high-speed cooling fan 1 x 120mm Selection of high-quality casting materials, compact Integrated casting base (optional), to further increase the stability of machine tools Taiwan's imports of hiwin linear Imported from Taiwan OEM PMI double nut ball screw Intime Safety electrical components of high quality and fast plug Manual lubrication system pre-installed to protect the rail life Pre-installed fourth axis fast interface Pre-loaded hand wheel controller MPG Pre-installed computer stand Dimensions (L x W x H) - 920mm x 790mm x 950mm
Package dimensions - 950mm x 840mm x 1150mm
Table size - 522mm x 160mm
T-slot size - 12mm
Weight - 350 ~ 450kg
Working travel - X-axis: 280mm
Y-axis: 160mm
Z-axis: 270mm
Spindle Speed - 200 ~ 5000rpm/min
Spindle Power - 1.1kw
Spindle taper - NT30/R8
Input voltage - 220v single phase AC
Positioning accuracy - <0.01mm
Clamping tool diameter - 4 ~ 16mm
Feed rate - X / Y axis: 3000mm/Min Z-axis: 2000mm/Min
Motor torque - X-axis stepper motor: 6.0Nm
Y-axis stepper motor: 6.0Nm
Z-axis stepper motor: 7.0Nm
Linear guideway - HIWIN OEM high precision linear
BallScrew - P5 Level Double nut ball screw PMI
Output port - standard 25-pin parallel port printing
standard 15pin parallel port
Spec X5 S X5 Speedmaster. SPEC
Dimensions (L x W x H) - 920mm x 790mm x 950mm
Package dimensions - 950mm x 840mm x 1150mm
Table size - 522mm x 160mm
T-slot size - 12mm
Weight - 350 ~ 450kg
Working travel - X-axis: 280mm
Y-axis: 160mm
Z-axis: 270mm
Spindle Speed - 8000 ~ 24000rpm/min
Spindle Power - 0.75kw
Spindle taper - ER11
Input voltage - 220v single phase AC
Positioning accuracy - <0.01mm
Clamping tool diameter - 4 ~ 16mm
Feed rate - X / Y axis: 3000mm/Min Z-axis: 2000mm/Min
Motor torque - X-axis stepper motor: 6.0Nm
Y-axis stepper motor: 6.0Nm
Z-axis stepper motor: 7.0Nm
Linear guideway - HIWIN OEM high precision linear
BallScrew - P5 Level Double nut ball screw PMI
Output port - standard 25-pin parallel port printing
Ultra high precision linear rails The table size -522 x 160mm 24,000 Precision high-speed water-cooled spindle transfer With 220V single-phase AC inverter High torque stepper motor axis 220V single-phase AC power supply Pre-installed high-speed cooling fan 1 x 120mm Selection of high-quality casting materials, compact Integrated casting base (optional), to further increase the stability of machine tools Taiwan's imports of hiwin linear Imported from Taiwan OEM PMI double nut ball screw Intime Safety electrical components of high quality and fast plug Manual lubrication system pre-installed to protect the rail life Pre-installed fourth axis fast interface Dual cooling system pre-installed standard base Pre-installed computer stand CE and CCC safety certification Spec X6 P 
X6 Plus. SPEC
-Ultra high precision linear rails -3.1 Inch single blue LCD display screen, display axis direction and movement size -Panel centralized manual control system, cooling and spindle control -The table size 690 x 210mm -Precision high-speed 5,000 rpm spindle, NSK spindle bearings -9.0Nm AC variable frequency motor drive with Delta VFD -3 phase high torque stepper motor -220V single-phase AC power supply -MT3 spindle size metric or imperial R8 -Pre-installed high-speed cooling fan 1 x 120mm -Selection of high-quality casting materials, compact -Taiwan's imports of hiwin linear -Imported from Taiwan OEM PMI double nut ball screw Intime -Safety electrical components of high quality and fast plug -Pre-installed standard base -Pre-installed automatic lubrication system to protect the rail life -Pre-installed fourth axis fast interface -Pre-installed computer stand -Optional Pneumatic Draw Bar System -CE and CCC safety certification Dimensions (L x W x H) - 720mm x 860mm x 1160mm
Package dimensions - 1200mm x 1100mm x 2000mm
Table size - 690mm x 210mm
T-slot size - 16mm
Weight - 700 ~ 750kg
Working travel - X-axis: 330mm
Y-axis: 220mm
Z-axis: 320mm
Spindle Speed - 200 ~ 5000rpm/min
Spindle Power - 1.5kw
Spindle taper - NT30/R8
Input voltage - 220v single phase AC
Positioning accuracy - <0.01mm
Clamping tool diameter - 4 ~ 16mm
Feed rate - X / Y axis: 3000mm/Min Z-axis: 2000mm/Min
Motor torque - X-axis stepper motor: 8.5Nm
Y-axis stepper motor: 8.5Nm
Z-axis stepper motor: 8.5Nm
Linear guideway - HIWIN OEM high precision linear
BallScrew - PMI double nut ball screw
Output port - standard 25-pin parallel port printing
standard 15pin parallel port
Spec X7 P X7 Plus. SPEC
Ultra high precision linear rails 3.1 Inch single blue LCD display screen, display axis direction and movement size Panel centralized manual control system, cooling and spindle control The table size 800 x 250mm 5000 Switch to precision high-speed spindle, NSK spindle bearings 9.0Nm AC variable frequency motor drive with Delta VFD 3 phase high torque stepper motor 220V single-phase AC power supply MT3 spindle size metric or imperial R8 Pre-installed high-speed cooling fan 1 x 120mm Selection of high-quality casting materials, compact Imported from Taiwan OEM PMI double nut ball screw Intime Taiwan's imports of hiwin linear Safety electrical components of high quality and fast plug Integration of base casting Pre-installed automatic lubrication system to protect the rail life Pre-loaded hand wheel controller MPG Pre-installed fourth axis fast interface Pre-installed computer stand Optional Pneumatic Draw Bar System Dimensions (L x W x H) - 1050mm x 1250mm x 1700mm
Package dimensions - 1250mm x 1450mm x 1900mm
Table size - 800mm x 250mm
T-slot size - 16mm
Weight - 800 ~ 850kg
Working travel - X-axis: 400mm
Y-axis: 240mm
Z-axis: 400mm
Spindle Speed - 200 ~ 5000rpm/min
Spindle Power - 2.2kw
Spindle taper - NT30/R8
Input voltage - 220v single phase AC
Positioning accuracy - <0.01mm
Clamping tool diameter - 4 ~ 16mm
Feed rate - X / Y axis: 3000mm/Min Z-axis: 2000mm/Min
Motor torque - X-axis stepper motor: 8.5Nm
Y-axis stepper motor: 8.5Nm
Z-axis stepper motor: 8.5Nm
Linear guideway - HIWIN OEM high precision linear
BallScrew - PMI double nut ball screw
Output port - standard 25-pin parallel port printing
standard 15pin parallel port
- X4 Plus
- X4 Speedmaster
- X5 Plus
- X5 Speedmaster
- X6 Plus
- X7 Plus
- Prices
